What Are Serially Produced Vessels
Specifies requirements for a method of manufacture of serially produced metallic and non-metallic unfired pressure vessels having a maximum volume of 500 L, and specified limits related to the vessels contents, on the product of the design pressure and the total vapour space. For such vessels, this method of manufacture based on type testing provides an alternative to the method given in AS 1210. Burst tests and other performance tests on a significant number of representative samples are used to validate design, materials and fabrication, simultaneously. RECONFIRMATION NOTICE Technical Committee ME-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change. Certain documents referenced in the publication may have been amended since the original date of publication.
For serially produced pressure vessels an alternative route is given in Annex A. Learning Group Leadership An Experiential Approach Pdf Writer. This annex is not applicable to vessels or vessel parts designed according to. Gas cylinders; LP gas fuel vessels for automotive use; serially produced vessels; pressure equipment excluded from the scope of AS/NZS 1200:2000 stated in section 4(1). Concrete placing booms; mobile cranes with a rated capacity of greater than 10 t; tower cranes including self-erecting tower cranes; amusement devices.
Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice. Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 01 May 2017. This Standard specifies requirements for the materials, design, manufacture, inspection and testing of serially produced metallic or non-metallic or combination unfired pressure vessels comprising: (a) A maximum volume of 500 L. (b) A design pressure exceeding 0.05 MPa.
(c) A product of the design pressure (in megapascals) and the total vapour space (in litres) that is greater than 1 but less than 3000 MPa.L. Where the vessel contents are classified as harmful or very harmful to AS 4343, the upper limit is 1500 MPa.L. This Standard excludes contents classified as lethal. NOTE: The vapour space is the maximum volume which will contain compressed gas or vapour or liquefied gas or liquid above its atmospheric boiling point. (d) A temperature range of –30 degrees Celsius to 15 0degrees Celsius. Vessels designated outside the range of 0 degrees Celsius to 50 degrees Celsius require special tests. Refer to Appendices D, F and G where applicable.